to bring tracking points serve multiple tracking codes, for example on the order page a customer under without the need for a change in the website by the customer is required for every new code. This is made possible by a tracking switch is first applied which are then added all tracking codes of various marketers and its own tracking code. The customer must then do is to use a single code for tracking soft and the tracking switch automatically takes care that the other tracking codes are loaded on the target website if necessary.
To Soft Tracking to create click the Administraions menu on the entry tracking soft. In the central area you will find above a list of already created tracking switches and edit the form below and add the tracking points. To create a tracking Soft you enter a name for the tracking switch (eg name of the customer or the website to multiple tracking points to distinguish them) and click Save. The newly created tracking points will appear listed at the top. The following settings are also possible:
|Name of tracking Soft
|S2S tracking provided
|(For information only) the tracking switch was built by the advertiser via S2S. It must, therefore, all assigned tracking code also be created as S2S
|Relates solely to tracking codes with the "Display = one": If could get multiple tracking codes to indicate which are occupied with this setting, the mode governs how the ad server chooses one of the tracking code. Choose from here "entry with the toughest filter Select" (a tracking code with filtering is a tracking code without filtering preferred) or "All Entries rate equal to" (it is the code with the latest tracking information used)
|Relates solely to tracking codes with the "Display = one": Controls whether to treated the same as the entries were selected for post-click data in selecting tracking codes that have been selected on the basis of post-view data.
|Hides the tracking points from the list of tracking points
Add tracking code
To a tracking code of a tracking Soft add, first click in the list of already created tracking points to "associated codes." In the right pane of the window a list of these points assigned codes as well as the form below to enter and edit tracking codes will appear above. A tracking Soft will display only those codes that you are directly assigned and which are active. The following values can be stored for each tracking code:
When is a tracking code displayed?
A tracking switch can be assigned to virtually any number of tracking codes. Whether tracking code is distributed depends particularly on the combination of the following factors:
- Active - only codes are delivered that ever made.
- Filter - If filters are defined (eg a publisher has been selected), the tracking code is only shown if the visitor meets these filters Kriete Rien.
- Parameter targeting - If defined, targeting for tracking turnout must pass.
- Postview permit - the code will only be displayed if ( "Yes") was considered an advertisement or only if ( "No") clicked on.
- Display - if selected "all", the code is always displayed when the other conditions are met. Was selected "only one" first be "collected" which are also set as "only one" and in which the remaining conditions allow displaying the codes all codes. Among all the codes found only one code will be shown the click is finally done or their insertion date (View) recently happened is ( "Last cookie wins"). This decision can be adjusted by using the mode settings of the tracking gate.
Important: All other codes have the status of "all" and their conditions are met "only one" codes are also displayed in addition to the.
to the code of the tracking points can be transferred to any number of parameters. Here, any parameters are passed to the associated code in place of & PARAMETERS (tracking Soft Code). Replace to please all occurrences of & PARAMETERS through a URL valid parameters, in the format & name1 = value1 & name2 = value2 & name3 = value3 etc .. The data transferred to these parameter values can then within the associated codes using the placeholder% name1%,% name2%,% name3%, etc. added. The placeholders "output" and "id" may not be used only. Example: Code of tracking points:
width="1" height="1" scrolling="no" frameborder="0"
Linked tracking code of the marketer with placeholders:
<img "src=http://www.vermarkterwebseite.de/lead.php?id=123&preis=%preis%" height="1" width="1" />
If the tracking code then delivered the value 33.45 appears in this example, instead of %price%.
Further, the predefined wildcard (see below) can be used. All placeholders can use also: enc URL encoded (eg. %used_trkinfo:enc%).
|Soft tracking of this code is to be assigned.
|internal name for this code; eg name of the marketer can be assigned as of the dates of this Code
|determines whether the code is active or not. Only codes are marked active are also delivered
|Active from / to
|Date from which the entry is active or is disabled.
|Controls whether the tracking code is to be accessed via a server 2 server or as a normal HTML code. Important Bind the Advertiser tracking soft as S2S one must ALL tracking code also be S2S. HTML codes are no longer fired.
|Code / URL
|ansich the tracking code or the tracking URL for S2S. Enter the code as you receive it from the marketer or draw from your campaign settings here. Please follow the instructions below on this help page.
|Publisher / website / placement
|It will only be delivered if the visitor an advertisement clicked previously on this ad space / website and this has seen the code.
|Advertiser / Campaign / Advertising
|It will only be delivered if the visitor has previously clicked on this advertising media / campaign or this has seen the code.
|Determined that the tracking code should only be extradited whom certain parameters were passed to the tracking switch.
|Determines whether the tracking code is competing with other codes or not. See notes below.
|Determines whether the visitor ("No") or whether it is sufficient seen this must have clicked on an ad to have ("Yes")
|SubId submitted by the publisher (extsubid=...)
|The ad server used tracking code that caused the triggering of the entry.